MOVING FLOOR BIN SPECIFICATIONS
8' 8" Wide (overall width including drives is 10' 8-3/4") x
12' 6" high
overall length is 9' 5-1/4"
10 Ton overall length is 13' 5-1/4"
14 Ton overall length is 17' 5-1/4"
16 Ton overall length is 19' 5-1/4"
20 Ton overall length is 23' 5-1/4"
Consult factory for different
length and height requirement
These dimensions include overhang of motors, control panel, etc.
1/2" UHMW floor
1/2" HDPE on sides and back
Exterior sides, floor and front
to be reinforced with galvanized perlin
9" x 9" bin discharge screw, stainless
steel, U-trough with gasket at joint, full pitch screw, open end discharge,
(1) #226 style hanger with UHMW bearing at discharge
floor chains with galvanized steel bars
Three vertical galvanized rake chains with
galvanized steel rakes
Bin is mounted on 3' legs with feet to allow discharge height for BL style
Three separate drives for floor, rake and
Two lexan viewing windows, one
on each side of discharge
2HP Rake Drive
1HP Floor Drive
1HP Screw Drive
Standard electrical is 230-460/3/60
50 hertz is an available option with upcharge
Product should be
installed in compliance with NEC (National Electric Code), OSHA,
anti other regulatory agencies. All specifications are subject
to change without notice.
1520 Westfork Drive Lithia Springs, Georgia 30122